上海骏赛包装机械有限公
刘璐 021-51870016 13564342156
上海市青浦区白鹤镇外青松公路2563号
www.junsai.com
实物图
样品图
产品简介
主要用于各种塑胶产品的成型包装，可将塑料片材吸塑成不同形状泡罩或泡壳。其成型原理：将片材加热到一定温度厚，通过真空泵产生负压将塑料片材吸附到模型表面上，经冷却定型而转变成不同形状的泡罩或泡壳。
特点： (Characteristic)
变频马达拉片，速度特快，冲击力小；(The frequency conversion motor pulls the piece, the speed express, the impulse is small)
数码调节拉片长度，快捷，准确；(The digital adjustment pulls the piece length, quick, accurate)
铝合金链轨，磨擦系数小，拉片平顺，外加不锈钢耐磨边框。(The aluminum alloy caterpillar track, the friction factor is small, pulls the piece to be smooth, sur- stainless steel wear-resisting
frame )快速简易宽度调节系统；手动调节宽窄，不锈钢模盘。 (Fast simple width governing system; The manual regulation width, the stainless steel molds)
调节中闸，中间调节，无油自润轴承设计； (In adjustment floodgate, middle adjustment, non-oil self lubricating bearing design)
组合模盘设计，易换式中闸及下闸设计； (The combination molds the design, easy to trade in the formula floodgate and under the floodgate design)
电炉采用全封闭式，横推式设计； (The electric stove uses totally enclosed, pushes the type design horizontally)
采用独家可推式模盘架，安全、高效、快捷；(Uses own may push the type to mold the
frame , safe, highly effective, quickly)气动部分二次稳定装置； (Air operated part two stabilization units)
独家数码千档制调温。(Own digital thousand grade of system temperature adjustments)
功能： (Function)
二次真空（大小真空）; (Two vacuums (size vacuum))
延时真空； (Time delay vacuum)
二次上模及多次上模脱模; (Two top dies and multiple top die drawing of patterns)
多次反吹脱膜； (Instead blows many times escapes the membrane)
电动式调上模行程、下闸行程、拉片长短； (The electromotive type accent top die traveling schedule, under the floodgate traveling schedule, pulls the piece length.)
垂真震动脱模功能；(Hangs vibrates the drawing of patterns function really)
冷风刹车；(Cold wind braking)
骏赛机械
