短切原丝毡或简称短切毡是将玻璃纤维原丝短切成50mm长度，均匀地降落在平面网上，用聚酯粉末（或乳液）粘结剂在一定温度下使其粘结而制成的一种玻璃纤维无纺增强材料。
产品特点：Features
树脂浸透快、脱泡性好，最大限度的保证生产效率并降低成本。
Quick wetting and rapid air release, Maximum molding productivity and reduced cost.
厚薄均匀，保证用户产品各部分同质
Excellent thickness uniformity,Consistent customer part quality.
极好的干燥保留性，提高生产效率并减少在展卷、裁剪和搬动中材料的损失
Superb dry integrity,Enhances productivity and reduces materials losses during unrolling, cutting and piece handling.
卷径小，卷绕密实，货物搬运安全、高效。
Small diameter, very dense rolls,Safe and efficient material handling.
产品应用：Applications
短切毡作为一种主要的玻璃纤维无纺增强材料，是FRP手胡工艺中用量最大的增强材料，也用于一些机械成型工艺，如RTM、缠绕、模压等。典型产品有：各种板材、船艇、浴室成套设备、汽车部件和冷却塔等。
技术指标：Technical data
包装：Packaging
中天俊达所产短切毡，使用直径为76mm的纸管卷取，毡卷包覆聚乙烯塑料袋并装入瓦楞纸箱。如要求托盘包装时，每托盘竖放16或12箱，横放9或6箱。托盘堆高不大于2层，纸箱堆高不超过5层。
Chopped strand mat from Zhongtian Junda , is wound on cardboard tube of 76mm inside diameter , after covered with a polyethylene plastic bag, then packaged with a cardboard box . If packaged with pallet , there should be 16 or 12 cartons placed vertically on each pallet; 9 or 6 cartons placed horizontally on a pallet . The pallets should be stocked 2 layers high maximum ,and the cartons 5 layers maximum when stocked .
贮存：Storage
产品应置于干燥、凉爽处，储存温度5-35°C，湿度35-65°C的环境下最佳。若不用，请勿打开包装，以免受潮，影响使用。
The product should be stored in dry and cool place wher is the best condition if has the temperature 5-35°C and the humidity 35-65°C. Unless use , the package must be kept intact in order to prevent moisture away .
